Yachticon Water pass cleaner 1000 ml

Product information 'Water pass cleaner' Removes effortlessly and reliably all water pass deposits, algae, yellowing, limescale, mussels, pockmarks, fouling, rust film and other soiling on the water pass and underwater hull Simply spread with a Float, leave to act briefly and wipe off. Does not attack plastic/gelcoat No scrubbing required Removes rust film and oil stains Gentle effect Not for Aluminum and Other metals/alloys except Stainless steel. Instructions for use: Check color fastness and material compatibility before use! Only use on washable surfaces. Use only on washable surfaces. Do not use on antifouling, it can lead to discoloration. Apply undiluted YACHTICON WATER PASS CLEANER to a damp Brushes or Float and clean the surface. Leave to act for approx. 15 - 30 minutes. Foaming indicates the reaction with limescale deposits. Then rinse with plenty of water. Repeat the process if the surface is very dirty. For permanent protection against new soiling, then seal the surface with a YACHTICON Grow. Safety information DANGER Hazard warnings: H315 Causes skin irritation. H318 Causes serious eye damage. P102 Keep out of the reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. P310 Immediately call a POISON CENTER/doctor. P362 + P364 Take off contaminated clothing and wash before reuse.