Yachticon Hull and gelcoat cleaner 5 liters

Product information 'Hull and gelcoat cleaner' Easily cleans all plastic surfaces on board, such as the hull and deck. Removes even stubborn stains, such as Waterline deposits Rust Fouling Limescale Yellowing caused by microorganisms Depositions on the waterline area Not for Aluminum and other metals/alloys except Stainless steel Never use with other cleaning agents (acids), as chlorine gas may be produced. Causes chemical burns. Instructions for use: Check color fastness and material compatibility before use! Only use on washable surfaces. Do not use with Other cleaning agents (chlorine). Do not use on Metal. Apply undiluted YACHTICON Hull and gelcoat cleaner to a wet Float and clean the surface thoroughly. Leave to work for approx. 15 - 30 minutes. Then rinse thoroughly with water and Float. For permanent protection against new soiling, then seal the surface with a YACHTICON GROW. Safety information DANGER Hazard warnings: H318 Causes serious eye damage. P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. P310 Immediately call a POISON CENTER/doctor. P501 Dispose of contents/container to an approved waste disposal plant.