Yachticon Puryclean 500 g

Product information 'Puryclean 500 g' This waste water tank cleaner is used to clean and disinfect waste water tanks and waste water systems, preferably at the end of the season. It disinfects waste water tanks and removes most types of deposits automatically. As a result, the cleaner eliminates unpleasant odors. The cleaner is very economical as it is a concentrate and should always be used at the end of the season before the dirt really settles during the winter months. For cleaning and disinfecting waste water tanks and systems, disinfects waste water tanks and thus eliminates unpleasant odors. Removes most types of deposits automatically Easy to use Very economical as it is a concentrate Dosage: Drain your waste water tank completely. Consumption approx.100g of Puryclean per 20 liters of tank contents. Dissolve the appropriate amount of PuryClean in approx. 5 liters of lukewarm water. Pump the solution into the tank. Fill the tank with water so that the tank walls and pipes are also covered by the solution. Leave the solution to stand for approx. 24 hours. Then pump out and rinse with water. If heavily soiled, the process should be repeated. To prevent unpleasant odors during the summer, use Purysan regularly. Tip: Should always be used at the end of the season before the dirt really settles during the winter months. Security information CAUTION Hazard warnings: H319 Causes serious eye irritation. Safety precautions: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention. Attention: Do not mix with other cleaners Ingredients: Citric acid, 0-5 % anionic surfactants