Vetus Mitsubishi M2.18 Bobtail for Gearbox

Vetus M2.18 marine diesel Technical data: 16PS / 11.8KW at 3600 1/min 2 Cylinder, 635cm³ 2-circuit cooling, 12V electrical system, MP10B12 Panels Without Gearbox Supplied as standard with the standard MP10B12 instrument panel and four flexible engine feet of type KSTEUN35V and a pre-installed Oil suction pump. VETUSM-LINE MOTORS The M-Line Motors impress with their smooth running, low fuel consumption and reliability. They are also self-priming, which is a great advantage and saves time after a fuel filter change, for example. All Motors are equipped with a powerful Alternator to quickly recharge the Batteries. The installation of a second alternator is possible as an option on all M4 models, as well as much more...! INNOVATION Low engine compartment temperature The engine compartment temperature can quickly rise to 70°C due to heat radiation from the engine. However, a high engine compartment temperature can have a negative impact on the performance of the Motor and Other installed parts. This is why VETUS has developed an elegant yet efficient solution by using a water-cooled Aluminum engine cover. Mounted directly over the cylinder head, this superbly sized cooling element absorbs the radiant heat from the Motors. This innovative concept leads to a significant reduction in the engine compartment temperature of up to 15°C, i.e. approx. 20%. The cooler ambient temperature in turn ensures cooler intake air, which leads to better combustion and lower fuel consumption. To our knowledge, no other marine engine manufacturer uses such an additional cooling element to reduce the ambient temperature. A truly unique solution from VETUS! Reduction ofengine noise Most people go boating to enjoy the peace and quiet on the water. VETUS does its part by developing drive systems that are as quiet as possible. The robust aluminum cover also significantly reduces engine noise. Tests have shown that in combination with the redesigned air filter housing, the noise level is reduced by 5dB(A); at cruising speed and 2200 rpm, the Motor operates almost noiselessly. All those involved in the tests were enthusiastic and described the engine acoustics as very pleasant to the ear. Features Based on customer feedback, the M-Line combines many features that make life much easier for both boat builders and end customers. - Maintenance-intensive parts and areas, such as Fuses and Relays (A), Fuel filter and Connections (B), Impeller (C), Oil dipstick (D), and Oil filter (E) are easily accessible. On all M4 Motors, the Impeller is located at the front - Wiring and Connections are routed so that they are easily accessible - All M-Line Motors are equipped with an electric fuel pump (F), which is put into operation with the Control of the start key - A new air filter housing dampens the air flow and reduces the intake noise level (G) - The Heat exchanger has no less than 26 improvements over previous versions, including better materials used and optimized surface treatment - The plastic front cover improves Security and appearance. All rollers and Oars are covered, in accordance with the EU Machinery Directive Front-mounted oil and Fuel filters and an additional Brackets are optionally available to make maintenance work even easier (H) - If a higher charging capacity is required, all M4 Motors can be equipped with a second alternator on request (when using a second alternator, the front cover is omitted) - All M4 Motors are available with the Vetus Power Pack as well as with hydraulic application, - Furthermore, Vetus offers an adapter for Volvo Penta Saildrives (110S/120S and 120SB) for all M-Line Motors. - An Oil suction pump is already installed on all M-Line Motors for easy maintenance. - And finally, the Aluminum engine cover is also ideal as a step, allowing better access to the engine room - All these advantages are achieved without compromising on other features. With a power range of 12 hp - 52 hp, the M-Line from VETUS is the preferred choice of many boat builders. Do you need more reasons to choose a VETUS Motor? When choosing a VETUS Motor, customers can expect the best possible service as well as high quality and professional advice. All M-Line Motors meet the RCD2 emission standards and some also meet the BSOII specifications.