Vetus main/emergency switch 12V f. Front/rear scr.

Type BPMAIN - ACCESSORIES FOR Bow thrusters, Anchor winches or other high-current consumers A remote-controlled emergency shutdown is required by law in many countries. The BPMAIN can be activated both electrically via Remote control and manually by hand. The Switches must be installed as close as possible to the Bow bolts (or other relevant consumer). The red emergency button should always be within easy reach. A control panel is supplied for switching on and off. - Available in 12 or 24 volt D.C. - Extension cables and additional control panels are available as accessories - Maximum loads: 250 A continuous load, 800 A for 3 minutes intermittent Note In the case of a 24 volt Bow bolts connected to a 12 volt electrical system using a series parallel switch, the 12 volt Main switch must be selected. And in the case of a 48 volt Bow bolts connected to a 24 volt vehicle electrical system using a series parallel switch, the 24 volt Main switch must be used.