Vetus Exhaust temperature alarm sensor for dampers

Exhaust gas temperature alarm type - Exhaust gas temperature alarm Safety first! Why you should always have a temperature alarm in the Exhaust system If the Cooling water system is clogged or the Impeller of the cooling water pump is damaged, very little or no water will enter the exhaust system. In this case, the temperature of the exhaust system rises much faster than the engine temperature, which is why VETUS recommends installing an Exhaust gas temperature alarm that gives an Acoustic and visual warning when the temperature in the exhaust hose or Silencer reaches a critical temperature. Specifications: - Hole dimension for sensor installation Ø 52 mm, total dimension 62 mm - Installation depth 40 mm - Available for 12 or 24 volts - Type XHSM for VETUS Water collectors with a pre-installed Connection - Type XHSH for installation in the exhaust hose Note: The Temperature sensors and alarm indicators must be ordered separately. In a system with two machines, both sensors can be connected to an alarm indicator. - Hole dimension for sensor installation Ø 52 mm, total dimension 62 mm - Installation depth 40 mm - Available for 12 or 24 volts - Type XHSM for VETUS Water collectors that have a pre-installed connection - Type XHSH for installation in the exhaust hose Note The temperature sensors and alarm indicators must be ordered separately. In a system with two machines, both sensors can be connected to an alarm indicator.