ProMariner Galvanic Insulators Prosafe FS30

Fail-safe technology with worry-free reliability. The ProSafe FS Series FailSafe 30 and 60 Ampere galvanic insulators interrupt the galvanic current flow with Other Boats in a marina when installed on a boat connected to AC shore power. This technology maintains AC safety grounding and solves the most common forms of corrosion and premature zinc loss in a Boats' interconnection system. The ProSafe FS series is UL certified and meets the parameters of the ABYC A-28 recommendation. ProSafe FS is simple to install and does not require a special monitor to check the operating status of the galvanic insulator, as is required with non-FailSafe certified galvanic insulators. Both the ProSafe 30 and 60A models are based on robust flat-pack semiconductor platforms and ensure that in the event of a failure ABYC

• A-28 July 2008 compliance and fail-safe certification: Certified by Underwriters Laboratories (UL).
• Ensures that the shore power safety ground wire is maintained by the Insulators.
Flat-pack high power semiconductors
• : Robust high power diodes enable the FS series to meet the new FailSafe criteria for conducting inrush currents of 3,000 and 5,000 Ampere (FS30 and FS60 respectively) for the required duration.
Innovative
• design: The FS60 cools itself if it needs to conduct Electricity to ensure cooler operation in this mode Ignition protected
• :
• Meets ISO 8846 and any model can be mounted in the engine compartment Gold-plated
• Connections: Simple install your green safety ground cable on board (between your AC input and your AC panels) to disconnect your DC bonding system from your green shore AC cable Use
• the ProSafe FS30 for 30 Ampere shore cable applications Use
• the ProSafe FS60 for (1) 50 Amp or (2) 30 Ampere shore cable applications