MG LFP Batteries 25.6V/304Ah/7800Wh(M12, HV)

This robust battery is based on LiFePo4 chemistry. With its high energy density, it is the next Steps technology within this chemistry series. This series consists of a 12.8 V and a 25.6 V battery. Both are suitable for replacing existing lead-acid battery banks. The modules are very compact and lightweight with high charge and discharge capability. At the same time, the longer cycle life makes them the better choice compared to traditional lead-acid batteries. Module Voltage: 25.6 V Capacity: 7.2 kWh - Lead-acid replacement - Extended service life - Compact design - Plug and play - Simple installation - High charge and discharge rate Applications The LFP series is designed for use in smaller applications. For example, as a replacement for traditional 12 V or 24 V lead-acid battery banks in Boats, RVs, caravans, cars and other mobile applications. Easyinstallation One of the shortcomings of a traditional system is all the equipment and wiring required to monitor and connect a battery bank. By combining the LFP series batteries with the MG Master LV, a compact system is created with reduced wiring and external components. The MG Master LV combines Battery monitoring and control, DC distribution, fuse box and Shunts in one device. Safety Each battery module is supplied with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS) that measures all cell voltages and temperatures in order to control balancing at both battery cell and module level. The battery modules communicate via a galvanically isolated CAN bus with the MG Master LV (Master BMS), which records and monitors the status of all battery modules. If the values measured by a battery module exceed the limit value, the MG Master automatically takes measures to protect the connected battery modules.