BEP Ultrasonic Tanks Sensors 10-32V

TS1 is an advanced tank sender based on ultrasonic measurement technology. Handles common outputs-240-33ohm, 10-180 OHM, Vetus 10-300OHM for analog resistance gauges (not for resistance digital meters or can systems) and 0-5 V tanks from BEP, Teleflex, Faria, VDO and many other popular brands of instruments. (When connecting with non-adjustable measuring devices, the TS1 must be pre-calibrated) Low profile design and Standard SAE 5-hole mounting pattern, so it can be retrofitted to virtually all other sender brands Can be set up via computer using BEP Marine's proprietary TS1 software for tank gauging, avoiding experimental tank filling in the field Connects directly to the BEP 600-TLM-N Digital Tank Monitor when configured with a 0-5 V output Can be set to 0-2000 mm depth off the shelf (not suitable for tank depths less than 200 mm) Operating voltage: 10-32 V. Current triggering: 25 mA with 5 V measurement data output Measurement method: Acoustic sound measurement Tank depth: 0-2000 mm (6.5 ft) Accuracy distance: 0-2000 mm (6.5 ft) at 2 mm accuracy Mounting: SAE 5 pin mounting pattern with gasket, Seals and screws (top mount only) Environmental temperature: 4-65 ° C C Chemical resistance: Gasoline, diesel, water, toilet chemicals Tank type style: Metal and plastic with non-linear capacity Works with gasoline, diesel, fresh water, gray water and black water USB driver: Reprogramming is required for applications other than the default settings. Programming is a Simple process and can be done by purchasing a programming kit, part number TS1-PK and following the detailed instructions. Please go to the 'Tech Data' tab to download the appropriate USB drivers and installation instructions. If you are not confident to do your own programming, your supplier offers this service at an additional charge. Please note that unless otherwise stated, the purchase price for the TS1 is for the standard configuration only and does not include reprogramming. BEP TS Programmer: BEP TS Programmer is a 32-bit Windows application that is used to pre-program the parameters of the TS1 ultrasonic tank transmitter via a computer com port. These parameters are stored in non-volatile memory in the tank transmitter and must be set correctly for TS1 to work with different tank shapes, sizes and fluid types. These parameters are divided into two categories: 1. sensor parameters and 2. linearization parameters