BEP programming device set for ultrasonic tank transmitter

If you use your TS1 ultrasonic tank emitter for applications other than the default settings, reprogramming is required. Programming is a simple process and can be accomplished by purchasing this programming kit and following the detailed instructions. USB driver: Reprogramming is required for applications other than the default settings. Programming is a Simple process and can be done by purchasing a programming kit, part number TS1-PK and following the detailed instructions. Please go to the 'Tech Data' tab to download the appropriate USB drivers and installation instructions. If you are not confident to do your own programming, your supplier offers this service at an additional charge. Please note that unless otherwise stated, the purchase price for the TS1 is for the standard configuration only and does not include reprogramming. BEP TS Programmer: BEP TS Programmer is a 32-bit Windows application that is used to pre-program the parameters of the TS1 ultrasonic tank transmitter via a computer com port. These parameters are stored in non-volatile memory in the tank transmitter and must be set correctly for TS1 to work with different tank shapes, sizes and fluid types. These parameters are divided into two categories: 1. sensor parameters and 2. linearization parameters