BEP Battery switch Easyfit, On/Off, 275A

The Easyfit Battery switch has been developed for installations where the switches need to be recessed into panels of different thicknesses. This is achieved by an easily removable threaded ring suitable for panel thicknesses up to 19 mm (3/4'). This Switches has the same features as the 701 with a removable key that extends 45 degrees past the off position, a labeled handle and a removable back cover that covers the exposed connections to meet ABYC specifications. It can also be surface mounted and offers a unique design compared to Other Switches on the market. BEP Marine Battery switch test procedure (UL 1107) Continuous (1 hour), intermittent (5 minutes) and cranking (engine start - 10 seconds). The test determines the maximum Electricity the Switches can handle for the specified time without the rear Connections exceeding 100 °C (212 °F) above ambient temperature. Continuous and intermittent ratings are tested at 110 percent of the specified ratings. All BEP Switches are tested to this specification by an independent laboratory. Can be easily retrofitted in place of most European post and lever switches Moulded from fiber-reinforced plastic for high Temperatures Tinned copper studs and nuts Incineration protected