Separate straight screw connection M22x1.5 for 10mm pipe

Separate straight screw connections Material: galvanized steel Mech. Connection: M22x1.5 for 10mm pipe Functionality The Separate screw connections, better fitting with cutting ring, are used to adapt the Separate filters from Lössing Filterproduktion GmbH to piping systems. 1. Screw the screw connection into the Separate screw connections. Sealings are provided by a pre-assembled O-ring. 2. Push the pipe with the appropriate outer diameter into the screw connection as far as it will go. 3. Tighten the union nut. When doing so, lock the screw connection (see point 1.) with a suitable wrench and secure it against twisting. 4. When the union nut is tightened, the edges of the cutting ring are pressed into the pipe due to its geometry. The cutting ring thus forms a tight, positive connection with the pipe. As an alternative to fixed piping, hose nipples can also be connected to the fitting.